Solution

A pressure switch is a switching component widely applied in automation systems of chemical, machinery, power, environmental protection and other industries, for measuring air, gas and liquid pressure   With the increasing application of pneumatic equipment in industrial automation, intelligent...

The following covers the test procedure, test fixture and test results of this experiment. Products of different series and grades can be tested using the same method. Test procedures:1. Test the switching response speed at four pressure setpoints: -50.0kPa, -60.0kPa, -70.0kPa and -80.0kPa. Before...

Digital pressure gauges commonly seen in the current industrial control market feature display, digital switch output and analog output. Readers of this article are presumed to be industry professionals, so we will not elaborate on these three functions. The following comparison focuses on our RS485...

Introduction In industrial control scenarios including automated equipment, tooling fixtures, vacuum picking and airtightness testing, Japan SMC ISE/ZSE series digital pressure gauges have long served as the mainstream industry solution. Nevertheless, many equipment manufacturers are confronted with...

The digital pressure gauge can be directly installed on the main body of the pressure reducing valve of the triplex unit through a dedicated adapter or standard interface, replacing or paralleling the traditional mechanical pressure gauge. This solution is widely used in modular F.R.L. combined comp...

When the equipment is operating, the vacuum generator generates negative pressure. The digital pressure gauge continuously monitors the vacuum level at the suction cup end or in the pipeline and displays the value in a highlighted digital screen clearly. When the suction cup successfully adheres to...